Microelectromechanical Systems(Micro sensors, Mciro actuators,micro-fabrication, et al)
Micro Inertial Technology( Micro Gyroscope,Micro Accelerometer,et al)
Micro Bio-inspired Robot,micro air vehicles(MAV)
Micro Code Lock for High Consequence System
BioMEMS(Micro Operation Biochip, PCR chip, et al)
Collimation/Focusing System Applied in Synchrotron Radiation Beam

1994 Bachelor,, Dept. of Mechanical Eng., Chongqing Univ.
1997 Master., Dept of Mechanical Eng., Chongqing Univ.
2005 Ph.D., Research Institute of Micro/nano Science & Technology, SJTU

08/1997-08/1999 Assistant Lecturer, Information Storage Research Center, SJTU.
08/1999-08/2004 Lecturer, Research Institute of Micro/nano Science & Technology, SJTU.
08/2004-12/2009 Associate Prof., Research Institute of Micro/nano Science & Technology, SJTU.
06/2007-09/2007 Academic Exchange in Latrobe University, Australia.
10/2008-10/2008 Academic Exchange in Waseda University, Japan.
12/2009 – present Professor, Research Institute of Micro/nano Science & Technology,SJTU

NSFC: Micro-manipulation and chip of MEMS-based Archimedes Diamagnetic Potential Energy Forceps (1/1/2009 – 12/31/2011) PI
NSFC: Research on New Self-stabilized Suspended MEMS Micro-gyroscope, based on Milli-Scale Inertial Steerable Energy Well Permanent Magnetic Rotor (1/1/2005 – 12/31/2007) PI
863: Hard Disk Physics Identification and Physics Encryption Technology Based on MEMS Stronglink (12/1/2006 – 12/31/2008) PI
863: Research on the Application of MEMS Stronglink for Information Security (6/1/2005 – 12/31/2005) PI
Provincial Project : Basic research on MEME-based Electrostatically Suspended Micro-Gyroscope (7/1/2006 – 6/31/2008) PI
CAS Project : Research on MEMS-based Flapping-wing Micromechanical Flying Insect (8/1/2009 – 8/31/2011) PI
Shanghai Talent Foundation : Hard Disk Physics Identification and Physics Encryption Technology Based on MEMS Stronglink (1/1/2008 – 6/31/2010) PI
National 973 Plan Subproject: Micro PCR Chip for Early stage Diagnosis of Gastric Cancer(2010-2015),PI
School Excellent youth Project: Research On the Application of Non-slicon Multi-beam Disk-shaped High Overload Self-test Micro-accelerometer (1/1/2008 – 12/31/2010) PI
School SMC outstanding youth Project: Basic Research on MEME-based Micro Inertial Devices (6/1/2008 – 6/31/2010) PI
National Eleventh Five-Year Project: Micromachined levitation gyroscope technique (2006-2010) Co-Pl
NSFC: Foundational research on novel micromachined solid modal gyroscope (2009-2011) Co-Pl
CASC:MEMS High Performance Electrostatically Suspended Accelerometer(2010-2011),Co-PI

China: Second prize of Technology Invention (2008) (Ranking 5)
China:The 10th excellence patent reward (2007) (Ranking1)
Shanghai: First prize of Technology Invention (2007) (Ranking7)
Shanghai: 3rd class Reward of Shanghai Sci. & Tech. progress (2005) (Ranking3)
Beijing:Second class Reward of Beijing Sci. & Tech. progress(2005) (Ranking9)
Ministry of Education: First prize of Technology Invention (2006) (Ranking 4)
Ministry of Education: Second prize of Natural Science (2008) (Ranking 4)
Ministry of Education: First Prize of patent invention(2006)(Ranking 2)
The 2nd class Reward of military Sci. & Tech. progress(2005)(Ranking 8)
The 2nd class reward of Mechanical industry progress of China(2006)(Ranking 2)
Shanghai Jiao Tong University:The SMC excellence Youth Teacher reward of SJTU(2008)(Ranking 1)
CIIF:The Creation Prize of China International Industry Fair(2009)(Rank 5)
CHTF: The Outstanding Product Reward of China Hi-Tech Fair(2009)(Rank 5)

Major Course of Master Candidate, Microsystem Design, 2005-present
Major Course of Master Candidate, Finite element Analysis, 2005-present

Weiping Zhang, et al, "A novel safety device with metal counter meshing gears discriminator directly driven by axial flux permanent magnet micromotors based on MEMS technology", Journal of Micromechanics and Microengineering, 12(2005):1601-1606.
Weiping Zhang, et al,"The study of an electromagnetic levitating micromotor for application in a rotating gyroscope ",Sensors and Actuators A: Physical Volume 132, Issue 2, 20 November 2006, Pages 651-657
Yipeng lu, Xiaosheng Wu, Weiping Zhang*, et al, "Research on reference vibration for two-axis piezoelectric micro-machined gyroscope", Journal of Micromechanics and Microengineering, 2010.
Kai liu, Weiping Zhang*, et al,”The development of micro-gyroscope technology”, J. Micromech. Microeng. 19 (2009) 113001 (29pp)
Kai Li, Wenyuan Chen, Weiping Zhang*, et al, “Electromechanical coupling analysis for MEMS featured by stepped-height structure and concentrated load”,Microsyst Technol, 2009(15):621–635.
Yipeng Lu, Xiaosheng Wu, Weiping Zhang*, et. al; Optimization and analysis of novel piezoelectric solid micro-gyroscope with high resistance to shock; Microsystem Technology, Microsyst Technol (2010) 16:571–584
Gaoyin Ma, Wenyuan Chen, Weiping Zhang*, et al, "Compact H∞ robust rebalance loop controller design for a micromachined electrostatically suspended gyroscope ", ISA Transactions 49 (2010) 222_228.
Kai Liu, Weiping Zhang*, et al， “An innovative micro-diamagnetic levitation system with coils applied in micro-gyroscope”, Microsyst Technol.2009(16): 1432-1858
Zhiqiang Liu, Xiaoyu Jia, Weiping Zhang, et al, Reactive sputtering TiO2 films for surface coating of poly(dimethylsiloxane),Applied Surface Science,2006(252):2259–2264
Wu Liu, Wenyuan Chen, Weiping Zhang,et al, “Variable-capacitance micromotor with levitated diamagnetic rotor”,Electronics Letters,2008,44(11):681-683.
Feng Cui, Wenyuan Chen, Weiping Zhang, et al. “Design and Fabrication of an Electrostatically Suspended Microgyroscope using UV-LIGA Technology”. Microsystem Technologies, 2009( 15):1885–1896.
Xiaoyu Jia, Zhiqiang Liu, Wenyuan Chen,Weiping Zhang, et al, “Polydimethylsiloxane (PDMS)-based spiral channel PCR chip”, Electronics letters, August,2005
W.Y. Chen, W.P. Zhang, “MEMS Stronglink and Application”, Scholarly Treatise, Publishing House of Science (2007)
W.Y. Chen, W.P. Zhang, ”Integrated micro-fluidic polymer PCR chip ”, Scholarly Treatise, Publishing House of Shanghai Jiao Tong University, (2009)
W.Y. Chen, W.P. Zhang, “ Micro bio-inspired flapping aerial vehicle”, Scholarly Treatise, Publishing House of Shanghai Jiao Tong University, (2010)

China Authorized （Selected）
ZHANG W, et al; Space posture adjustable continuous focus varying super-length aligning and focusing system for synchronous radiation; Patent No.: ZL031293191.3, Date of Application: 19 Jun 2003, Date of Authorization: Jul 2005
ZHANG W, et al; Electromagnetic driving flexible dynamically tuned gyroscope, Patent No.: ZL200510027717.6, Date of Application: 14 Jul 2005, Date of Authorization: Jul 2008
ZHANG W, et al; Diamagnetic suspended rotor miniature gyroscope driven electrostatically; Patent No.: ZL200710038292.8, Date of Application: 22 Mar 2007, Date of Authorization: May 2009
ZHANG W, et al; Flexible hard magnet and soft magnet compensation type moment fluid micro-gyroscope, has four feedback moment windings and four flexible compensatory hard polar plates provided at same circular ring centered on center of stator; Patent No.: ZL200710041462.8, Date of Application: 31 May 2007, Date of Authorization: Aug 2009
ZHANG W, et al; Mass micro-accelerometer for dual mode anti-magnetic susceptibility of micro electro-mechanical system, has lower stator cross separation structure for separating bottom space of lower stator matrix into four areas; Patent No.: ZL200710042302.5, Date of Application: 21 Jun 2007, Date of Authorization: May 2009
ZHANG W, et al; Hardware encryption system, has authentication module communicated with peripheral control interface hardware encryption card in communication way of peripheral control interface protocol; Patent No.: ZL200810038183.0, Date of Application: 29 May 2008, Date of Authorization: Oct 2009

China Pending （Selected）
ZHANG W, et al; Anti-magnetic suspension type corona driving micro-gyroscope, has nickel gear-form structure fixed in internal side of ring-shape rotor, and upper stator and lower stator fixed relatively vertical to each other in space; Application No.: 200910052148.9, Date of Application: 27 May 2009
Zhang W, et al, Micro electro mechanical solid gyro for complex density and rigidity in micro electro mechanical system, has signal interference isolating electrode placed at outer side of mode detecting electrode, Application No.: 200910055598.3, 30 July 2009
ZHANG W, et al; Micro-rotary gyro for use in e.g. automobile, has micro rotator provided in middle of caged structure, and upper stator and lower stator provided with similar structure and positioned vertical to each other； Application No.: 200910052145.5, Date of Application: 27 May 2009
ZHANG W, et al; Driving code identifying and coupling integrated micro electromechanical password lock, has pallet embedded in tooth slot of ratchet wheel, and photoelectric sensor placed corresponding to interference resisting gear set in shell body, Application No.: 200910055602.6, Date of Application: 30 July 2009
ZHANG W, et al; Hard magnetic suspension mini-spinning top for micro electromechanical application, has displacement detection electrodes and iron core choking coil array, around hard